GSO ASTM F3218:2022
Gulf Standard
Current Edition
·
Approved on
12 May 2022
·
Standard Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
GSO ASTM F3218:2022 Files
No files are available for this standard right now!
GSO ASTM F3218:2022 Scope
When conducting test methods, it is important to consider the role that the environmental conditions play in the
Automatic through Autonomous – Unmanned Ground Vehicle
(A-UGV) performance. Various A-UGVs are designed to be
operated both indoors and outdoors under conditions specified
by the manufacturer. Likewise, end users of the A-UGV will be
operating these vehicles in a variety of environmental conditions. When conducting and replicating F45 test methods by
vehicle manufacturers and users, it is important to specify and
document the environmental conditions under which the
A-UGV is to be tested as there will be variations in vehicle
performance caused by the conditions, especially when comparing and replicating sets of test results. It is also important to
consider changes in environmental conditions during the
course of operations (for example, transitions between conditions). As such, environmental conditions specified in this
practice are static, dynamic, or transitional, or combinations
thereof; with the A-UGV stationary or in motion. This practice
provides brief introduction to the following list of environmental conditions that can affect performance of the A-UGV:
Lighting, External sensor emission, Temperature, Humidity,
Electrical Interference, Air quality, Ground Surface, and
Boundaries. This practice then breaks down each condition
into sub-categories so that the user can document the various
aspects associated with the category prior to A-UGV tests
defined in ASTM F45 Test Methods (for example, F3244). It is
recommended that salient environment conditions be documented when conducting F45 test methods
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO BS 1212-2:2024
BS 12122:1990
Gulf Standard
Float operated valves - Part 2: Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints