GSO ISO/ASTM 51275:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Practice for use of a radiochromic film dosimetry system
GSO ISO/ASTM 51275:2021 Files
No files are available for this standard right now!
GSO ISO/ASTM 51275:2021 Scope
ISO/ASTM 51275:2013 is a practice for using radiochromic film dosimetry systems to measure absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water.
Radiochromic film dosimetry systems are generally used as routine dosimetry systems.
The radiochromic film dosimeter is classified as a Type II dosimeter on the basis of the complex effect of influence quantities.
ISO/ASTM 51275:2013 is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ASTM E2628 for a radiochromic film dosimetry system. It is intended to be read in conjunction with ASTM E2628.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
BH GSO OIML R87:2022
GSO OIML R87:2021
Bahraini Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
BH GSO OIML R79:2022
GSO OIML R79:2021
Bahraini Standard
Labeling requirements for prepackages
Recently Published from Metrology Sector
GSO IEC 62586-1:2024
IEC 62586-1:2017
Gulf Standard
Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
GSO ISO 748:2024
ISO 748:2021
Gulf Standard
Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
GSO ISO 26101-1:2024
ISO 26101-1:2021
Gulf Standard
Acoustics — Test methods for the qualification of the acoustic environment — Part 1: Qualification of free-field environments
GSO ISO/TR 17534-4:2024
ISO/TR 17534-4:2020
Gulf Standard
Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1