GSO ISO 14270:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
GSO ISO 14270:2021 Files
No files are available for this standard right now!
GSO ISO 14270:2021 Scope
ISO 14270:2016 specifies specimen dimensions and a testing procedure for mechanized peel testing of single spot, seam and embossed projection welds, in overlapping sheets, in any metallic material of thickness 0,5 mm to 3 mm, where the welds have a maximum diameter of 7√t (where t is the sheet thickness in mm).
For welds of diameter between 5√t and 7√t, the peel strength values obtained may be lower than expected when using the recommended test specimen dimensions because the test specimen width is designed for welds of diameter of 5√t or less.
The object of mechanized peel testing is to determine the peel strength that the test specimen can sustain.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 1085:2024
ISO 1085:2016
Gulf Standard
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
GSO ECE R155:2024
ECE R155:2021
Gulf Standard
Uniform provisions concerning the approval of vehicles with regards to cyber security and cyber security
GSO ISO 8562:2024
ISO 8562:2022
Gulf Standard
Cycles — Stem wedge angle
GSO ECE R 130:2024
ECE R 130:2016
Gulf Standard
Uniform provisions concerning the approval of motor vehicles with regard to the Lane Departure Warning System (LDWS)