GSO ISO 3655:2017
Gulf Standard
Current Edition
·
Approved on
03 October 2017
·
Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table -- General introduction and testing of the accuracy
GSO ISO 3655:2017 Files
English
17 Pages
Current Edition
Reference Language
17.23 BHD
GSO ISO 3655:2017 Scope
This International Standard defines machining operations on
vertical turning and boring lathes with one or two columns and
a Single fixed or movable table. lt defines and summarizes the
different types of machines and establishes a glossary for the
various types of machine tool. lt indicates, with reference to
ISO 230/1, both geometrical and practical tests for such vertical
lathes, and gives the corresponding permissible deviations
for general purpose use machines of normal accuracy.
NOTE - In addition to terms used in the three official ISO languages
(English, French and Russian), this International Standard gives the
equivalent terms in German, Italian and Swedish; these have been
included at the request of Technical Committee ISO/TC 39 and are
published under the responsibility of the member bodies for Germany
F.R. (DIN), Italy (UNI) and Sweden (SIS). However, only the terms
given in the official languages tan be considered as ISO terms.
lt deals only with the verification of accuracy of the machine. lt
does not apply to the running of the machine (vibrations,
abnormal noises, stick-slip motion of components, etc.) or to
machine characteristics (Speeds, feeds, etc. 1, which should
generally be checked before testing accuracy.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary