GSO ISO/ASTM 51650:2017
Gulf Standard
Current Edition
·
Approved on
27 April 2017
·
Practice for use of a cellulose triacetate dosimetry system
GSO ISO/ASTM 51650:2017 Files
Arabic
16 Pages
Current Edition
41.35 BHD
English
6 Pages
Current Edition
Reference Language
18.09 BHD
GSO ISO/ASTM 51650:2017 Scope
ISO/ASTM 51650:2013 is a practice for using a cellulose triacetate (CTA) dosimetry system to measure absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water. The CTA dosimetry system is classified as a routine dosimetry system.
The CTA dosimeter is classified as a type II dosimeter on the basis of the complex effect of influence quantities on its response.
ISO/ASTM 51650:2013 is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing, and describes a means of achieving compliance with the requirements of ASTM E2628 for a CTA dosimetry system. It is intended to be read in conjunction with ASTM E2628.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
BH GSO OIML R87:2022
GSO OIML R87:2021
Bahraini Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
BH GSO OIML R79:2022
GSO OIML R79:2021
Bahraini Standard
Labeling requirements for prepackages
Recently Published from Metrology Sector
GSO ISO 12039:2024
ISO 12039:2019
Gulf Standard
Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems
GSO ISO 11426:2024
ISO 11426:2021
Gulf Standard
Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)
GSO ISO 26101-1:2024
ISO 26101-1:2021
Gulf Standard
Acoustics — Test methods for the qualification of the acoustic environment — Part 1: Qualification of free-field environments
GSO ISO 14405-2:2024
ISO 14405-2:2018
Gulf Standard
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes