GSO ISO 2603:2013
Gulf Standard
Current Edition
·
Approved on
01 April 2013
·
Booths for simultaneous interpretation -- General characteristics and equipment
GSO ISO 2603:2013 Files
English
13 Pages
Current Edition
Reference Language
27.14 BHD
GSO ISO 2603:2013 Scope
This International Standard lays down basic specifications to be considered when initial plans are prepared for building
or renovating built-in booths for simultaneous interpretation in new or existing buildings.
It is applicable to all types of built-in booths with built-in or portable equipment.
NOTE 1 Mobile booths for simultaneous interpretation are specified in ISO 4043.
In designing new buildings, booths should be optimally integrated into the structure so that the conference room and
the booths constitute a well-balanced unit. Design should also provide daylight for the conference hall and booths.
The requirements of clauses 4 and 5 apply to booths with built-in equipment, as defined in 3.1, and booths with
portable equipment, as defined in 3.2.
The dimensional requirements apply equally to semi-permanent booths, as defined in 3.3, for which all other
requirements should apply as far as is possible.
In addition to structural and design specifications, this International Standard specifies those components of typical
conference facilities which form the interpreters working environment.
NOTE 2 Clause 12 gives indications concerning the use of public address systems in conjunction with simultaneous interpretation
systems.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
BH GSO OIML R87:2022
GSO OIML R87:2021
Bahraini Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
BH GSO OIML R79:2022
GSO OIML R79:2021
Bahraini Standard
Labeling requirements for prepackages
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 3864-2:2024
ISO 3864-2:2016
Gulf Standard
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
GSO ISO 748:2024
ISO 748:2021
Gulf Standard
Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
GSO ISO 14405-2:2024
ISO 14405-2:2018
Gulf Standard
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes