GSO ISO 2768-1:2002
Gulf Technical Regulation
Current Edition
·
Approved on
21 October 2002
·
Generar tolerances part tolerances for linear and anyular dimension withuot individual to lerance indications .
GSO ISO 2768-1:2002 Files
Arabic
8 Pages
Current Edition
8.61 BHD
English
3 Pages
Current Edition
Reference Language
4.31 BHD
GSO ISO 2768-1:2002 Scope
This standard is intended to simplify drawing indications and it specifies general tolerances for linear and angular dimensions without individual tolerance indications in four tolerance classes1).
It applies to the dimensions of parts that are produced by metal removal or parts that are formed from sheet metal. These tolerances may be suitable for use with materials other than metal. This part only applies to the following dimensions which do not have an individual tolerance indication:
a) Linear dimensions (e.g. external sizes, internal sizes, step sizes, diameters, radii, distances, external radii and chamfer heights for broken edges).
b) Angular dimensions, including angular dimensions usually not indicated, e.g. right angles (90o), or angles of uniform polygons.
c) Linear and angular dimensions produced by machining assembled parts.
It does not apply to the following dimensions:
a) Linear and angular dimensions which are covered by reference to other standards on general tolerances;
b) Auxiliary dimensions indicated in brackets;
c) Theoretically exact dimensions indicated in rectangular frames.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
BH GSO OIML R87:2022
GSO OIML R87:2021
Bahraini Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
BH GSO OIML R79:2022
GSO OIML R79:2021
Bahraini Standard
Labeling requirements for prepackages
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 14405-2:2024
ISO 14405-2:2018
Gulf Standard
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
GSO ASTM E2847:2024
ASTM E2847:21
Gulf Standard
Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
GSO ISO 3455:2024
ISO 3455:2021
Gulf Standard
Hydrometry — Calibration of current-meters in straight open tanks