GSO ISO 25745-1:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Energy performance of lifts, escalators and moving walks -- Part 1: Energy measurement and verification
GSO ISO 25745-1:2015 Files
English
15 Pages
Current Edition
Reference Language
41.35 BHD
GSO ISO 25745-1:2015 Scope
1.1 General
This part of ISO 25745 specifies:
a) methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis;
b) methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation.
This part of ISO 25745 only considers the energy performance during the operational portion of the life cycle of the lifts, escalators or moving walks.
1.2 Lifts
For lifts, this part of ISO 25745 does not cover energy aspects, such as:
a) hoistway lighting;
b) heating and cooling equipment in the lift car;
c) machine room lighting;
d) machine room heating, ventilation and air conditioning;
e) non-lift, display systems, closed circuit television security cameras, etc.;
f) non-lift, monitoring systems (building management systems, etc.);
g) the effect of lift group dispatching on energy consumption;
h) consumption through the power sockets.
1.3 Escalators and moving walks
For escalators and moving walks, this part of ISO 25745 covers energy aspects of the ancillary equipment, such as:
a) lighting with the exception of comb plate lighting and step gap lighting and traffic light;
b) cooling and heating;
c) alarm devices and emergency battery supplies equipment, etc.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
GSO ISO 24513:2024
ISO 24513:2019
Gulf Standard
Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary